Vopsea epoxidica Neopox Special

Neopox Special
Product Description
Fields of Application
Properties/ Advantages
Neopox Special is a two-component solvent-based epoxy paint suitable for use on construction, metallic & GRP surfaces that undergo significant mechanical stress and need chemical resistance.
• Floors of industries, warehouses, car services places • Swimming pools, tanks, fountains, boats
• Indoor metallic surfaces
• Resistant at temperatures between -50C and +140C (short-term resistance). Permanent resistance between -20 C and +70 C.
• Neopox Special doesn’t pre-require the substrate priming. In special occasions it is required the use of Epoxol Primer (see table below)

-Type of substrate
-Consumption
Epoxol Primer
-Consumption
Neopox Special
-Mosaic
-100gr/m2/layer
-125gr/m2/layer
-Ceramic Tiles
-100gr/m2/layer
-125gr/m2/layer
-Cementitious with high porosity
-150- 200gr/m2/layer
-125gr/m2/layer

Technical Characteristics Appearance
Density (EN ISO 2811.01)
Mixing ratios (weight prop.) Gloss 600
Consumption Substrate Temperature
• Excellent resistance to water, sea water, alkalis, petroleum derivatives, industrial atmosphere and adverse weather conditions. Good resistance to solvents and dilute acids (see table of chemical resistance).
• Suitable and as a protective coating to biological purification plants.
• Widespread use of applications with the same material.
• Wide range of basic colours.
Compliant with the regulation 2004/42/EC for limitation of V.O.C. in paints and varnishes.
Gloss
0,98-1,2 kg/l (depending on the shade) 75Α:25Β
86
250-350gr/m2 for two layers (depending on substrate) +12C to +35C

The information supplied in this datasheet, concerning the uses and the applications of the product, is based on the experience and knowledge of NEOTEX SA .It is offered as a service to designers and contractors in order to help them find potential solutions. However, as a supplier, NEOTEX SA does not control the actual use of the product and therefore cannot be held responsible for the results of its use. As a result of continual technical evolution, it is up to our clients to check with our technical department that this present data sheet has not been modified by a more recent edition.

Neopox Special
Ambient Temperature Dry film thickness
Surface humidity content Relative atmospheric humidity
Total Hardening
Abrasion resistance(ASTM D 4060)
Bond strength (EN 13892-8) Flexibility
Pot Life
+12 C to +35 C 60-80μm per layer <4%
<70%
~ 7 days
57 mg (TABER TEST CS 10/1000/1000)
≥ 2,5 N/mm2
PASS (ASTM D522, 180 bend, 1/8" mandrel)
Temperature
Time
+12C
2 hours
+25C
1 hour
+30C
1 hour
Overcoating
Temperature
Time
+12C
36 hours
+25C
24 hours
+30C
24 hours
Walkability
Temperature
Time
+12C
36 hours
+25C
24 hours
+30C
24 hours

The information supplied in this datasheet, concerning the uses and the applications of the product, is based on the experience and knowledge of NEOTEX SA .It is offered as a service to designers and contractors in order to help them find potential solutions. However, as a supplier, NEOTEX SA does not control the actual use of the product and therefore cannot be held responsible for the results of its use. As a result of continual technical evolution, it is up to our clients to check with our technical department that this present data sheet has not been modified by a more recent edition.
Neopox Special
Quality/Preparation of Substrate